Choosing a pick and place robot means deciding how fast it should run—and that decision affects both cost and reliability. Speed parameters like acceleration, deceleration and peak velocity must match the product and the line rhythm rather than simply being set to maximum.

Buyers often focus on a pick-and-place robot’s rated cycle time and leave the motion settings to the integrator. Yet those settings need careful tuning: overly aggressive motion can damage products and increase wear, while overly conservative motion can limit throughput. Choosing suitable parameters helps the cell run reliably at the required rate.

Acceleration Matters More Than Top Speed

On short pick-and-place moves, the robot may spend much of its time accelerating and decelerating, making acceleration more influential than peak velocity. Gentler acceleration can protect fragile products and reduce wear, while faster acceleration can increase throughput. The settings must fit the product and application.

Acceleration can matter more than peak speed in many pick-and-place tasks. Over a short distance, the robot may not reach its maximum velocity before it must slow down. Matching acceleration and deceleration to the product’s fragility and the gripper’s holding force helps the cell achieve the required throughput without compromising handling.

Match Speed to the Conveyor

The robot’s timing must synchronize with conveyor speed and product spacing. A controller receiving encoder feedback can track changes in conveyor position, while the motion parameters must allow enough time to pick and place within the available workspace.

Conveyor tracking requires the robot to match the product’s motion during the pick, while moving quickly enough between picks to meet the required throughput. Encoder feedback and appropriately tuned motion profiles help keep the pick point aligned with the product. Integrators set these parameters during commissioning and may adjust them when line conditions change.

Document Settings Per Product

Different products often need different speed profiles. Recipe storage lets operators recall the right parameters when a product returns to the line. At ATOMROBOT, we help customers build speed recipes during commissioning so changeovers are consistent and fast.

Documenting settings for each product preserves the results of commissioning. A recipe can contain the motion profile, approach speed, grip timing, placement deceleration and release delay for a particular product. Operators can then recall the appropriate settings during changeover instead of starting the tuning process again.

Well-chosen speed parameters help a robot fit the needs of a production line. By tuning acceleration, coordinating conveyor tracking and documenting settings for each product, manufacturers can improve both throughput and handling reliability.

Speed is a tuning decision, not a maximum setting. Choose acceleration, velocity and timing that protect your product and fit your line, and the pick and place robot will deliver both speed and reliability.

Related links: Delta robots

CATEGORIES:

Feature articles

Tags:

better tech, better life

Latest Comments

No comments to show.